Description
The holographic effect creates a prism-like, shimmering appearance on garments or fabrics. This vinyl has a reflective surface that catches and reflects light, producing a stunning and eye-catching look that is perfect for creating attention-grabbing designs. Hologram HTV is available in a variety of colours and finishes, allowing for the customization of a wide range of products. It is a popular choice for adding a unique and dazzling effect to t-shirts, bags, hats, and other garments or fabrics.
Specification:
Thickness: 80 microns/.08 mm
Carrier sheet: 100 microns/ 0.1mm
- Heat press setting:
- Preheat the heat press to 300°-320°F (150-160C).
- Place your fabric onto the heat press and preheat it for 5-10 seconds to remove any moisture and wrinkles.
- Place your design onto the fabric, with the carrier sheet facing up.
- Apply heat and pressure for 8-12 seconds using medium to high pressure.
- Peel off the carrier sheet while it is still warm.
- If the vinyl is not fully adhered, repeat steps 4-5 until it is.
- Iron-On setting:
- For using a household iron, set it to the Cotton/Linen or Wool setting, which is usually the highest temperature setting available.
- Turn OFF the steam setting on the iron.
- Preheat the area of the fabric where you want to apply the vinyl for 10-15 seconds.
- Place the weeded image onto the preheated fabric, liner side up. Apply medium to high pressure with the iron for 50 seconds, pressing down firmly and evenly with both hands.
- Flip the fabric over and apply medium pressure with the iron to the back of the material for an additional 50 seconds.
- Let the vinyl cool for a few seconds, then gently peel off the carrier sheet while it is cold.
- If the vinyl is not fully adhered, repeat steps 4-6 until it is.
Note: Always perform a test cut and test application on a small, inconspicuous area of your fabric before applying your design to your final project to ensure the best results.
Care Instructions
Wait 24 hours before washing. Handwash the embellished item inside out in cold water. Do not bleach. Do not tumble dry. If necessary, iron back side of the garment.
Following these care instructions will help to preserve the quality and longevity of your heat transfer vinyl project.
